QDate ¶

QDate class provides date functions. 更多 …

概要 ¶

函数 ¶

def __eq__ (other)
def __ge__ (other)
def __gt__ (other)
def __le__ (other)
def __lt__ (other)
def __ne__ (other)
def __reduce__ ()
def __repr__ ()
def addDays (days)
def addMonths (months)
def addMonths (months, cal)
def addYears (years)
def addYears (years, cal)
def day ()
def day (cal)
def dayOfWeek ()
def dayOfWeek (cal)
def dayOfYear ()
def dayOfYear (cal)
def daysInMonth ()
def daysInMonth (cal)
def daysInYear ()
def daysInYear (cal)
def daysTo (arg__1)
def endOfDay ([spec=Qt.LocalTime[, offsetSeconds=0]])
def endOfDay (zone)
def getDate (year, month, day)
def isNull ()
def isValid ()
def month ()
def month (cal)
def setDate (year, month, day)
def setDate (year, month, day, cal)
def startOfDay ([spec=Qt.LocalTime[, offsetSeconds=0]])
def startOfDay (zone)
def toJulianDay ()
def toPython ()
def toString ([format=Qt.TextDate])
def toString (format)
def toString (format, cal)
def toString (format, cal)
def weekNumber ()
def year ()
def year (cal)

静态函数 ¶

def currentDate ()
def fromJulianDay ( jd_ )
def fromString (s, format)
def fromString (s, format, cal)
def fromString (s[, f=Qt.TextDate])
def isLeapYear (year)
def isValid (y, m, d)
def longDayName (weekday[, type=DateFormat])
def longMonthName (month[, type=DateFormat])
def shortDayName (weekday[, type=DateFormat])
def shortMonthName (month[, type=DateFormat])

详细描述 ¶

A QDate object represents a particular day, regardless of calendar, locale or other settings used when creating it or supplied by the system. It can report the year, month and day of the month that represent the day with respect to the proleptic Gregorian calendar or any calendar supplied as a QCalendar 对象。

A QDate object is typically created by giving the year, month, and day numbers explicitly. Note that QDate interprets year numbers less than 100 as presented, i.e., as years 1 through 99, without adding any offset. The static function currentDate() 创建 QDate object containing the date read from the system clock. An explicit date can also be set using setDate() 。 fromString() function returns a QDate given a string and a date format which is used to interpret the date within the string.

year() , month() ，和 day() functions provide access to the year, month, and day numbers. Also, dayOfWeek() and dayOfYear() functions are provided. The same information is provided in textual format by toString() . The day and month numbers can be mapped to names using QLocale .

QDate provides a full set of operators to compare two QDate objects where smaller means earlier, and larger means later.

You can increment (or decrement) a date by a given number of days using addDays() . Similarly you can use addMonths() and addYears() 。 daysTo() function returns the number of days between two dates.

daysInMonth() and daysInYear() functions return how many days there are in this date’s month and year, respectively. The isLeapYear() function indicates whether a date is in a leap year.

备注 ¶

No Year 0 ¶

There is no year 0. Dates in that year are considered invalid. The year -1 is the year “1 before Christ” or “1 before current era.” The day before 1 January 1 CE, QDate (1, 1, 1), is 31 December 1 BCE, QDate (-1, 12, 31).

Range of Valid Dates ¶

Dates are stored internally as a Julian Day number, an integer count of every day in a contiguous range, with 24 November 4714 BCE in the Gregorian calendar being Julian Day 0 (1 January 4713 BCE in the Julian calendar). As well as being an efficient and accurate way of storing an absolute date, it is suitable for converting a date into other calendar systems such as Hebrew, Islamic or Chinese. The Julian Day number can be obtained using toJulianDay() and can be set using fromJulianDay() .

The range of dates able to be stored by QDate as a Julian Day number is for technical reasons limited to between -784350574879 and 784354017364, which means from before 2 billion BCE to after 2 billion CE.

另请参阅

QTime QDateTime QCalendar YearRange QDateEdit QDateTimeEdit QCalendarWidget

class QDate ¶

QDate(QDate)

QDate(y, m, d)

QDate(y, m, d, cal)

param y

int

param m

int

param cal

QCalendar

param QDate

QDate

param d

int

Constructs a null date. Null dates are invalid.

另请参阅

isNull() isValid()

Constructs a date with year y , month m and day d .

The date is understood in terms of the Gregorian calendar. If the specified date is invalid, the date is not set and isValid() 返回 false .

警告

Years 1 to 99 are interpreted as is. Year 0 is invalid.

另请参阅

isValid() dateFromParts()

PySide2.QtCore.QDate. MonthNameType ¶

This enum describes the types of the string representation used for the month name.

常量	描述
QDate.DateFormat	This type of name can be used for date-to-string formatting.
QDate.StandaloneFormat	This type is used when you need to enumerate months or weekdays. Usually standalone names are represented in singular forms with capitalized first letter.

PySide2.QtCore.QDate. __reduce__ ( ) ¶

返回类型: PyObject

PySide2.QtCore.QDate. __repr__ ( ) ¶

返回类型: PyObject

PySide2.QtCore.QDate. addDays ( days ) ¶

参数: days – qint64
返回类型: QDate

返回 QDate object containing a date ndays later than the date of this object (or earlier if ndays is negative).

Returns a null date if the current date is invalid or the new date is out of range.

另请参阅

addMonths() addYears() daysTo()

PySide2.QtCore.QDate. addMonths ( months ) ¶

参数: months – int
返回类型: QDate

这是重载函数。

PySide2.QtCore.QDate. addMonths ( months , cal ) ¶

参数

months – int
cal – QCalendar

返回类型

QDate

返回 QDate object containing a date nmonths later than the date of this object (or earlier if nmonths is negative).

Uses cal as calendar, if supplied, else the Gregorian calendar.

注意

If the ending day/month combination does not exist in the resulting month/year, this function will return a date that is the latest valid date in the selected month.

另请参阅

addDays() addYears()

PySide2.QtCore.QDate. addYears ( years ) ¶

参数: years – int
返回类型: QDate

这是重载函数。

PySide2.QtCore.QDate. addYears ( years , cal ) ¶

参数

years – int
cal – QCalendar

返回类型

QDate

返回 QDate object containing a date nyears later than the date of this object (or earlier if nyears is negative).

Uses cal as calendar, if supplied, else the Gregorian calendar.

注意

If the ending day/month combination does not exist in the resulting year (e.g., for the Gregorian calendar, if the date was Feb 29 and the final year is not a leap year), this function will return a date that is the latest valid date in the given month (in the example, Feb 28).

另请参阅

addDays() addMonths()

static PySide2.QtCore.QDate. currentDate ( ) ¶

返回类型: QDate

Returns the current date, as reported by the system clock.

另请参阅

currentTime() currentDateTime()

PySide2.QtCore.QDate. day ( ) ¶

返回类型: int

这是重载函数。

PySide2.QtCore.QDate. day ( cal ) ¶

参数: cal – QCalendar
返回类型: int

Returns the day of the month for this date.

Uses cal as calendar if supplied, else the Gregorian calendar (for which the return ranges from 1 to 31). Returns 0 if the date is invalid.

另请参阅

year() month() dayOfWeek()

PySide2.QtCore.QDate. dayOfWeek ( ) ¶

返回类型: int

这是重载函数。

PySide2.QtCore.QDate. dayOfWeek ( cal ) ¶

参数: cal – QCalendar
返回类型: int

Returns the weekday (1 = Monday to 7 = Sunday) for this date.

Uses cal as calendar if supplied, else the Gregorian calendar. Returns 0 if the date is invalid. Some calendars may give special meaning (e.g. intercallary days) to values greater than 7.

另请参阅

day() dayOfYear() DayOfWeek

PySide2.QtCore.QDate. dayOfYear ( cal ) ¶

参数: cal – QCalendar
返回类型: int

Returns the day of the year (1 for the first day) for this date.

Uses cal as calendar if supplied, else the Gregorian calendar. Returns 0 if either the date or the first day of its year is invalid.

另请参阅

day() dayOfWeek()

PySide2.QtCore.QDate. dayOfYear ( ) ¶

返回类型: int

这是重载函数。

PySide2.QtCore.QDate. daysInMonth ( ) ¶

返回类型: int

这是重载函数。

PySide2.QtCore.QDate. daysInMonth ( cal ) ¶

参数: cal – QCalendar
返回类型: int

Returns the number of days in the month for this date.

Uses cal as calendar if supplied, else the Gregorian calendar (for which the result ranges from 28 to 31). Returns 0 if the date is invalid.

另请参阅

day() daysInYear()

PySide2.QtCore.QDate. daysInYear ( ) ¶

返回类型: int

这是重载函数。

PySide2.QtCore.QDate. daysInYear ( cal ) ¶

参数: cal – QCalendar
返回类型: int

Returns the number of days in the year for this date.

Uses cal as calendar if supplied, else the Gregorian calendar (for which the result is 365 or 366). Returns 0 if the date is invalid.

另请参阅

day() daysInMonth()

PySide2.QtCore.QDate. daysTo ( arg__1 ) ¶

参数: arg__1 – QDate
返回类型: qint64

Returns the number of days from this date to d (which is negative if d is earlier than this date).

Returns 0 if either date is invalid.

范例：

												d1 = QDate(1995, 5, 17)  # May 17, 1995
d2 = QDate(1995, 5, 20)  # May 20, 1995
d1.daysTo(d2)          # returns 3
d2.daysTo(d1)          # returns -3
												
											

另请参阅

addDays()

PySide2.QtCore.QDate. endOfDay ( [ spec=Qt.LocalTime [ , offsetSeconds=0 ] ] ) ¶

参数

spec – TimeSpec
offsetSeconds – int

返回类型

QDateTime

PySide2.QtCore.QDate. endOfDay ( zone ) ¶

参数: zone – QTimeZone
返回类型: QDateTime

这是重载函数。

static PySide2.QtCore.QDate. fromJulianDay ( jd_ ) ¶

参数: jd – qint64
返回类型: QDate

Converts the Julian day jd 到 QDate .

另请参阅

toJulianDay()

static PySide2.QtCore.QDate. fromString ( s [ , f=Qt.TextDate ] ) ¶

参数

s – unicode
f – DateFormat

返回类型

QDate

static PySide2.QtCore.QDate. fromString ( s , format ) ¶

参数

s – unicode
format – unicode

返回类型

QDate

static PySide2.QtCore.QDate. fromString ( s , format , cal ) ¶

参数

s – unicode
format – unicode
cal – QCalendar

返回类型

QDate

返回 QDate represented by the string ，使用 format given, or an invalid date if the string cannot be parsed.

Uses cal as calendar if supplied, else the Gregorian calendar. Ranges of values in the format descriptions below are for the latter; they may be different for other calendars.

These expressions may be used for the format:

Expression	Output
d	The day as a number without a leading zero (1 to 31)
dd	The day as a number with a leading zero (01 to 31)
ddd	The abbreviated localized day name (e.g. ‘Mon’ to ‘Sun’). Uses the system locale to localize the name, i.e. `system()` .
dddd	The long localized day name (e.g. ‘Monday’ to ‘Sunday’). Uses the system locale to localize the name, i.e. `system()` .
M	The month as a number without a leading zero (1 to 12)
MM	The month as a number with a leading zero (01 to 12)
MMM	The abbreviated localized month name (e.g. ‘Jan’ to ‘Dec’). Uses the system locale to localize the name, i.e. `system()` .
MMMM	The long localized month name (e.g. ‘January’ to ‘December’). Uses the system locale to localize the name, i.e. `system()` .
yy	The year as a two digit number (00 to 99)
yyyy	The year as a four digit number, possibly plus a leading minus sign for negative years.

注意

Unlike the other version of this function, day and month names must be given in the user’s local language. It is only possible to use the English names if the user’s language is English.

All other input characters will be treated as text. Any non-empty sequence of characters enclosed in single quotes will also be treated (stripped of the quotes) as text and not be interpreted as expressions. For example:

												date = QDate.fromString("1MM12car2003", "d'MM'MMcaryyyy")
# date is 1 December 2003

If the format is not satisfied, an invalid QDate is returned. The expressions that don’t expect leading zeroes (d, M) will be greedy. This means that they will use two digits even if this will put them outside the accepted range of values and leaves too few digits for other sections. For example, the following format string could have meant January 30 but the M will grab two digits, resulting in an invalid date:

												date = QDate.fromString("130", "Md") # invalid
												
											

For any field that is not represented in the format the following defaults are used:

Field	默认值
Year	1900
Month	1
Day	1

The following examples demonstrate the default values:

												QDate.fromString("1.30", "M.d")           # January 30 1900
QDate.fromString("20000110", "yyyyMMdd")  # January 10, 2000
QDate.fromString("20000110", "yyyyMd")    # January 10, 2000
												
											

注意

If localized month and day names are used, please switch to using system() .toDate() as QDate methods shall change to only recognize English (C locale) names at Qt 6.

另请参阅

toString() fromString() fromString() toDate()

PySide2.QtCore.QDate. getDate ( year , month , day ) ¶

参数

year – int
month – int
day – int

Extracts the date’s year, month, and day, and assigns them to *``year`` , *``month`` , and *``day`` . The pointers may be null.

Returns 0 if the date is invalid.

注意

In Qt versions prior to 5.7, this function is marked as non- const .

另请参阅

year() month() day() isValid() partsFromDate()

static PySide2.QtCore.QDate. isLeapYear ( year ) ¶

参数: year – int
返回类型: bool

返回 true if the specified year is a leap year in the Gregorian calendar; otherwise returns false .

另请参阅

isLeapYear()

PySide2.QtCore.QDate. isNull ( ) ¶

返回类型: bool

返回 true if the date is null; otherwise returns false . A null date is invalid.

注意

The behavior of this function is equivalent to isValid() .

另请参阅

isValid()

PySide2.QtCore.QDate. isValid ( ) ¶

返回类型: bool

返回 true if this date is valid; otherwise returns false .

另请参阅

isNull() isDateValid()

static PySide2.QtCore.QDate. isValid ( y , m , d ) ¶

参数

y – int
m – int
d – int

返回类型

bool

这是重载函数。

返回 true if the specified date ( year , month ，和 day ) is valid in the Gregorian calendar; otherwise returns false .

范例：

												QDate.isValid(2002, 5, 17)  # True
QDate.isValid(2002, 2, 30)  # False (Feb 30 does not exist)
QDate.isValid(2004, 2, 29)  # True (2004 is a leap year)
QDate.isValid(2000, 2, 29)  # True (2000 is a leap year)
QDate.isValid(2006, 2, 29)  # False (2006 is not a leap year)
QDate.isValid(2100, 2, 29)  # False (2100 is not a leap year)
QDate.isValid(1202, 6, 6)   # True (even though 1202 is pre-Gregorian)
												
											

另请参阅

isNull() setDate() isDateValid()

static PySide2.QtCore.QDate. longDayName ( weekday [ , type=DateFormat ] ) ¶

参数

weekday – int
type – MonthNameType

返回类型

unicode

注意

此函数被弃用。

Returns the long name of the weekday for the representation specified by type .

The days are enumerated using the following convention:

1 = “Monday”
2 = “Tuesday”
3 = “Wednesday”
4 = “Thursday”
5 = “Friday”
6 = “Saturday”
7 = “Sunday”

The day names will be localized according to the system’s locale settings, i.e. using system() .

Returns an empty string if the date is invalid.

另请参阅

toString() shortDayName() shortMonthName() longMonthName()

static PySide2.QtCore.QDate. longMonthName ( month [ , type=DateFormat ] ) ¶

参数

month – int
type – MonthNameType

返回类型

unicode

注意

此函数被弃用。

Returns the long name of the month for the representation specified by type .

The months are enumerated using the following convention:

1 = “January”
2 = “February”
3 = “March”
4 = “April”
5 = “May”
6 = “June”
7 = “July”
8 = “August”
9 = “September”
10 = “October”
11 = “November”
12 = “December”

The month names will be localized according to the system’s locale settings, i.e. using system() .

Returns an empty string if the date is invalid.

另请参阅

toString() shortMonthName() shortDayName() longDayName()

PySide2.QtCore.QDate. month ( ) ¶

返回类型: int

这是重载函数。

PySide2.QtCore.QDate. month ( cal ) ¶

参数: cal – QCalendar
返回类型: int

Returns the month-number for the date.

Numbers the months of the year starting with 1 for the first. Uses cal as calendar if supplied, else the Gregorian calendar, for which the month numbering is as follows:

1 = “January”
2 = “February”
3 = “March”
4 = “April”
5 = “May”
6 = “June”
7 = “July”
8 = “August”
9 = “September”
10 = “October”
11 = “November”
12 = “December”

Returns 0 if the date is invalid. Note that some calendars may have more than 12 months in some years.

另请参阅

year() day()

PySide2.QtCore.QDate. __ne__ ( other ) ¶

参数: other – QDate
返回类型: bool

返回 true if this date is different from d ；否则返回 false .

另请参阅

operator==()

PySide2.QtCore.QDate. __lt__ ( other ) ¶

参数: other – QDate
返回类型: bool

PySide2.QtCore.QDate. __le__ ( other ) ¶

参数: other – QDate
返回类型: bool

PySide2.QtCore.QDate. __eq__ ( other ) ¶

参数: other – QDate
返回类型: bool

返回 true if this date and d represent the same day, otherwise false .

PySide2.QtCore.QDate. __gt__ ( other ) ¶

参数: other – QDate
返回类型: bool

返回 true if this date is later than d ；否则返回 false。

PySide2.QtCore.QDate. __ge__ ( other ) ¶

参数: other – QDate
返回类型: bool

返回 true if this date is later than or equal to d ；否则返回 false .

PySide2.QtCore.QDate. setDate ( year , month , day ) ¶

参数

year – int
month – int
day – int

返回类型

bool

Sets this to represent the date, in the Gregorian calendar, with the given year , month and day numbers. Returns true if the resulting date is valid, otherwise it sets this to represent an invalid date and returns false.

另请参阅

isValid() dateFromParts()

PySide2.QtCore.QDate. setDate ( year , month , day , cal ) ¶

参数

year – int
month – int
day – int
cal – QCalendar

返回类型

bool

Sets this to represent the date, in the given calendar cal ，采用给定 year , month and day numbers. Returns true if the resulting date is valid, otherwise it sets this to represent an invalid date and returns false.

另请参阅

isValid() dateFromParts()

static PySide2.QtCore.QDate. shortDayName ( weekday [ , type=DateFormat ] ) ¶

参数

weekday – int
type – MonthNameType

返回类型

unicode

注意

此函数被弃用。

Returns the short name of the weekday for the representation specified by type .

The days are enumerated using the following convention:

1 = “Mon”
2 = “Tue”
3 = “Wed”
4 = “Thu”
5 = “Fri”
6 = “Sat”
7 = “Sun”

The day names will be localized according to the system’s locale settings, i.e. using system() .

Returns an empty string if the date is invalid.

另请参阅

toString() shortMonthName() longMonthName() longDayName()

static PySide2.QtCore.QDate. shortMonthName ( month [ , type=DateFormat ] ) ¶

参数

month – int
type – MonthNameType

返回类型

unicode

注意

此函数被弃用。

Returns the short name of the month for the representation specified by type .

The months are enumerated using the following convention:

1 = “Jan”
2 = “Feb”
3 = “Mar”
4 = “Apr”
5 = “May”
6 = “Jun”
7 = “Jul”
8 = “Aug”
9 = “Sep”
10 = “Oct”
11 = “Nov”
12 = “Dec”

The month names will be localized according to the system’s locale settings, i.e. using system() .

Returns an empty string if the date is invalid.

另请参阅

toString() longMonthName() shortDayName() longDayName()

PySide2.QtCore.QDate. startOfDay ( [ spec=Qt.LocalTime [ , offsetSeconds=0 ] ] ) ¶

参数

spec – TimeSpec
offsetSeconds – int

返回类型

QDateTime

PySide2.QtCore.QDate. startOfDay ( zone ) ¶

参数: zone – QTimeZone
返回类型: QDateTime

这是重载函数。

PySide2.QtCore.QDate. toJulianDay ( ) ¶

返回类型: qint64

Converts the date to a Julian day.

另请参阅

fromJulianDay()

PySide2.QtCore.QDate. toPython ( ) ¶

返回类型: PyObject

PySide2.QtCore.QDate. toString ( [ format=Qt.TextDate ] ) ¶

参数: format – DateFormat
返回类型: unicode

这是重载函数。

Returns the date as a string. The format parameter determines the format of the string.

若 format is TextDate , the string is formatted in the default way. The day and month names will be localized names using the system locale, i.e. system() . An example of this formatting is “Sat May 20 1995”.

若 format is ISODate , the string format corresponds to the ISO 8601 extended specification for representations of dates and times, taking the form yyyy-MM-dd, where yyyy is the year, MM is the month of the year (between 01 and 12), and dd is the day of the month between 01 and 31.

format options SystemLocaleDate , SystemLocaleShortDate and SystemLocaleLongDate shall be removed in Qt 6. Their use should be replaced with ShortFormat) or LongFormat) .

format options LocaleDate , DefaultLocaleShortDate and DefaultLocaleLongDate shall be removed in Qt 6. Their use should be replaced with ShortFormat) or LongFormat) .

若 format is RFC2822Date , the string is formatted in an RFC 2822 compatible way. An example of this formatting is “20 May 1995”.

If the date is invalid, an empty string will be returned.

警告

ISODate format is only valid for years in the range 0 to 9999.

另请参阅

fromString() toString()

PySide2.QtCore.QDate. toString ( format , cal ) ¶

参数

format – DateFormat
cal – QCalendar

返回类型

unicode

注意

此函数被弃用。

PySide2.QtCore.QDate. toString ( format ) ¶

参数: format – unicode
返回类型: unicode

PySide2.QtCore.QDate. toString ( format , cal ) ¶

参数

format – unicode
cal – QCalendar

返回类型

unicode

PySide2.QtCore.QDate. weekNumber ( ) ¶

返回类型: (week, yearNumber)

Returns the ISO 8601 week number (1 to 53).

Returns 0 if the date is invalid. Otherwise, returns the week number for the date. If yearNumber 不是 None (its default), stores the year as *``yearNumber`` .

In accordance with ISO 8601, each week falls in the year to which most of its days belong, in the Gregorian calendar. As ISO 8601’s week starts on Monday, this is the year in which the week’s Thursday falls. Most years have 52 weeks, but some have 53.

注意

*``yearNumber`` is not always the same as year() . For example, 1 January 2000 has week number 52 in the year 1999, and 31 December 2002 has week number 1 in the year 2003.

另请参阅

isValid()

PySide2.QtCore.QDate. year ( ) ¶

返回类型: int

这是重载函数。

PySide2.QtCore.QDate. year ( cal ) ¶

参数: cal – QCalendar
返回类型: int

Returns the year of this date.

Uses cal as calendar, if supplied, else the Gregorian calendar.

Returns 0 if the date is invalid. For some calendars, dates before their first year may all be invalid.

If using a calendar which has a year 0, check using isValid() if the return is 0. Such calendars use negative year numbers in the obvious way, with year 1 preceded by year 0, in turn preceded by year -1 and so on.

Some calendars, despite having no year 0, have a conventional numbering of the years before their first year, counting backwards from 1. For example, in the proleptic Gregorian calendar, successive years before 1 CE (the first year) are identified as 1 BCE, 2 BCE, 3 BCE and so on. For such calendars, negative year numbers are used to indicate these years before year 1, with -1 indicating the year before 1.

另请参阅

month() day() hasYearZero() isProleptic()

内容表

上一话题

下一话题

快速搜索

QDate ¶

概要 ¶

函数 ¶

静态函数 ¶

详细描述 ¶

备注 ¶

No Year 0 ¶

Range of Valid Dates ¶